
English version at the end of this post

Material:
- blanko Karten
- Kunstlederreste oder ähnliches
- Borten und Bänderreste
- Silikonstempel
- Stempelfarbe
- Schere
- Bleistift
- Kartonrest
- Geodreieck
- Glitzergarn
- Nähmaschine

Um nicht auf die Karten malen zu müssen, denn selbst leichte Bleistiftstriche sind auf Karton nicht mehr ausradierbar, zeichne ich immer auf einem anderen Karton die Formen vor und übertrage mit dieser Schablone die Form direkt auf die Rückseite des Stoffes. Wenn die Formen zugeschnitten sind, legt man sie auf die Karten, nur um zu sehen wo und wie man am besten die Stempel anbringen muss. Gestempelt wird zuerst, denn nur wenn der Stempel gut aufgebracht wurde lohnt es sich die Mühe zu machen die Karte fertig zu stellen. Wenn die Stempel angebracht wurden, ich habe alle in Schwarz gestempelt um eine Linie in alle 3 Karten zu bringen, dann kann man mit dem nähen beginnen. Für das silberne Kunstleder habe ich die Naht in Silbergarn aufgesteppt, für die roten Borten habe ich ein glänzendes, rotes Garn verwendet. Normale Nähnadel reicht vollkommen aus. Die Form einfach mit einem Finger am Platz halten und an einer Stelle anfangen abzusteppen. Schmalkantig absteppen, verriegeln nicht vergessen. Garnenden abschneiden. Erst alles was mit Silbergarn aufgesteppt werden muss absteppen, dann die roten Borten anbringen. Den Stern habe ich direkt auf die Karte gemalt und die Borten einfach auf die Linien gelegt und abgesteppt. Immer den Anfang und das Ende der Naht verriegelt. Da mir der Stern noch nicht so alleine aus Borten gefertigt gefallen hat, habe ich noch winzige Kreise und Dreiecke ausgeschnitten und auf die Enden der Borten mittig aufgesteppt. Die roten Borten etwas länger abschneiden, aber nur im mittleren Teil aufsteppen so kann auch mal was sich verschieben, der überstehende Rest danach abschneiden. Obertransport bei der Nähmaschine ist immer eine gute Idee. Ich nähe immer nur mit einem Obertransporter, das erleichtert den ganzen Nähprozess.

Die Karten sehen jetzt auch schön von innen aus da man die untere Naht sieht. Glitzergarn auch beim Unterfaden benutzten dann habt ihr einen schönen negativen Abdruck eurer Nähkunst im Inneren der Karte.

Und wenn man mal nicht zufrieden ist mit seiner Naht dann bitte nicht auftrennen. Kunstleder und Papier verzeihen keine Naht, die Nadellöcher sind nicht wieder zu koriegieren. Vorsichtig nähen, nicht zu schnell absteppen und wenn nötig mit dem Handrad drehen. Wenn was nicht schön aussieht – dann macht einfach Deko drüber:-)

Creadienstag — Handmade on Tuesday — Freutag — Samstagsplausch — Sonntagsglück – Embracing Change – Vintage Charm Party – Friday Features Linky Party – Bloggers Pit Stop – Handmade & Otherwise Weekly Link Up – Make it Pretty Monday – a Morning Cup of Joe – Home matters party – Saturday sparks Link Party – the handmade Hangout
Bevor ihr kommentiert lest bitte meine Datenschutzerklärung durch. Danke
Before you comment please read my privacy policy. Thank you

[Advertisement – without assignment] After last week’s simple Christmas tree pendant, it’s getting a little more challenging today: I’ll show you how to sew Christmas cards. And I’m doing handicrafts with my favourite materials again: leftovers:-) You always have leftovers from other projects, especially if you sew a lot of fabric. In the shallows of my cellar I discovered a high-quality faux leather scrap in silver, still remaining from my final fashion show at the end of my studies – I had a science fiction theme, so everything was kept in silver and white:-) And from my Christmas tree pendants with photos and trims 2 years ago I had still so beautiful, glittering trims left, so the idea for the Christmas cards was born rapidly. There are blank cards in every good handicraft shop, I got myself 3 pieces. Dark grey, light grey and white, matching the silver faux leather. What you still need are silicone stamps, or homemade stamps matching the Christmas theme and of course stamping ink. Every good sewing machine can sew through paper or cardboard and I find a sewn Christmas card has a little more value than a glued one. I’m not a fan of gluing fabric and mesh, I’ve often mentioned that here. And it’s not that difficult, you just have to dare and maybe if you’re inexperienced you can sew on another piece of cardboard. If I hadn’t found the faux leather, I would have used SnapPap or Vegatex, as long as the fabric doesn’t fray on the sides. If you don’t have such a fabric you can also work with normal cotton fabric, then you simply iron on a nonwoven interlining on the left side of the fabric and then it has a better strength and doesn’t fray.
Material:
- blank cards
- faux leather or similar
- trims and ribbon scraps
- silicone stamp
- stamping ink
- scissors
- pencil
- cardboard scrap
- triangle
- glitter thread
- sewing machine
In order not to have to paint on the
cards, because even light pencil strokes cannot be erased on
cardboard, I always draw the shapes on another cardboard and transfer
the shape directly to the back of the fabric with this template. When
the shapes are cut, you put them on the cards, just to see where and
how to put the stamps. Stamping is done first, because only if the
stamp is well applied it is worth the effort to finish the card. When
the stamps have been applied, I have stamped them all in black to
make them all in the same look, then you can start sewing. For the
silver faux leather I sewed the seam in silver thread, for the red
borders I used a shiny red thread. Normal sewing needle is completely
sufficient. Simply hold the form in place with a finger and start
sewing at one point. Topstitch narrowly, do not forget to lock. Cut
off the ends of the yarn. First sew everything that has to be sewn
with silver yarn, then attach the red borders. I painted the star
directly on the card and simply put the trims on the lines and sewed
them. Always lock the beginning and the end of the seam. Since I
didn’t like the star made from trims alone, I cut out tiny circles
and triangles and sewed them onto the ends of the trims. Cut off the
red borders a little longer, but only sew them on in the middle part
so something can shift, the rest can be cut off afterwards. A top
transport sewing foot at the sewing machine is always a good idea. I
always sew with a top transporter, which makes the whole sewing
process easier.
The cards now also looks nice from the inside
because you can see the bottom seam. If you use glitter thread also
for the bottom thread you will have a nice negative impression of
your sewing art inside the card.
And if you are not satisfied
with your seam please do not open it again. Faux leather and paper
don’t forgive seams, the holes from the sewing needle can’t be
repaired. Sew carefully, do not sew too fast and if necessary turn
with the handwheel. If something doesn’t look nice – then simply put
decoration over it:-)
A wonderful idea! Your cards are so pretty!
Michelle
https://bijoubeadboutique.com
Guten Morgen,
auch wenn solche Projekte nichts sind, wofür ich Geduld und Fingerfertigkeit aufbringen könnte, finde ich sie wirklich wunderschön. Über die Anleitung werden sich sicher einige Leser*innen freuen.
Hab ein schönes Wochenende
LG
Yvonne
Der genähte Christbau ist sehr schön. Viel Freude beim Schnippseln und steppen. LG von Regula
Lovely! Thanks for sharing at Vintage Charm!
Obwohl bereits mitten in der Woche, doch manchmal dauert es einfach etwas länger … und hetzen ist nix für mich. Daher heute mein nachgefasster Samstagsplausch.
Witzige Karten!
Herbstbunte Grüße von Heidrun
Thanks for sharing at the Fabulous Friday Linky Party! We hope you can join us again this week…https://abiggreenhouse.com/the-super-fabulous-friday-linky-party-9/